Whether installing in a new plant or seeking to replace an existing pump, MasoSine SPS pumps offer the ideal solution to improve your performance and minimise
cost of ownership.
The sinusoidal rotor design of MasoSine SPS pumps delivers a lower shear, gentle pumping action that safely transfers delicate products without risk of degradation.
SPS pumps are suitable for industrial applications up to 217psi (15 bar) pressure at flows up to 434 GPM (99,000 l/hr). Products with viscosities from 1cP to 8 million cP can be transfered with powerful suction up to 0.85bar.
Capable of handling soft solids safely up to 60mm, maintaining end product quality and delivering high yield rates.
Maintenance takes minutes and can be performed in-place by a line operative. Replace off-the-shelf wear components to restore to “new pump” performance with no need for re-machining or using oversized parts.
MasoSine SPS pumps
A single sinusoidal rotor in the pump creates four evenly sized chambers as it rotates within the pump. Fluid is “pulled” through the inlet on the suction side into each chamber in turn. As each chamber rotates, it contracts, closes and finally discharges fluid through the outlet port. At the same time, the opposite chamber opens to draw in more fluid.
The result is a perfectly smooth flow, free of any pulsation. A gate functions as a seal between the inlet and outlet sides of the pump. Preventing equalization of pressure and stopping fluid escaping from the higher pressure outlet into the lower pressure suction side. The sinusoidal rotor rotates within two replaceable liners, ensuring no wear to either the pump housing or cover.
All MasoSine pumps of SPS series have 20 years warranty on housing and front cover.
